(G)36(F)lash(H)ider(C)ompensator(28)1/2-28 thread pitch(F)FaceMount(KM)KeyMount

In order to use this device with a suppressor, it must be installed by a professional - to ensure it is properly mounted and aligned. Do NOT shoot without checking alignment with bore rods. JMac Customs is not responsible for any damage to the suppressor, or any injury resulting from improper installation. Some firearms are NOT suitable suppressor hosts, just because you can thread this muzzle device on, does NOT mean it is safe to use.

The GFHC is a combination of the German G36 flash hider and DeadAir Silencers KeyMount.

BARREL DIAMETER MUST BE <0.585"

This WILL NOT work on a standard AKM, pistol, or SBR. Barrel must extend at least 1.32” from the gasblock

This is designed to be permanently attached to a 14.5 inch barrel and adapt to KeyMo compatilble suppressors!

Compensated version that has to be timed in order to reduce muzzle rise

SHIMS ONLY NEEDED FOR TIMING

• 1/2-28 Threads
• KeyMo & KeyMicro Suppressor compatible
• 10mm Bore
• Adds Exactly 1.5"
• 2.7" Long
• 17-4ph Stainless Steel
• Black Nitride

Keymount & X-Series Suppressor Compatibility

JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.