(R)ecoil (R)eduction (360)Degree Ports (H)eavy (D)uty (30)5/8-24 Threads (T)aperMount (KM)KeyMount
The RRD-360HD is designed specifically with short barrels and high pressures in mind! Due to excess pressures and gasses associated with rifle calibers in short-barreled firearms, a barrel length restriction was put in place for many of our popular devices. To remedy this, we've taken our 360 design and reinforced the device by adding additional material where it's needed and removing material in some areas to cut down on size, and weight. You get the same amazing performance out of our 360 devices, now with a Heavier Duty design for short-barreled firearms!
The 360HD-30T-KM is designed specifically for tapered barrels such as those found on the Sig Sauer MPX, MCX, and M400 as well as Faxxon barrels. This KeyMount(KeyMiicro) device will allow you to attach KeyMo compatible suppressors and accessories to your firearm. In addition to a KeyMount compatible suppressor, the 360HD-28T is also compatible with any of our Blast Diversion Shields (BDS) in combination with the proper KeyMount adapter.
*This device is designed for tapered barrels, not standard shouldermount application!
What makes the 360 unique?
- 3 layers of protection for your suppressor
- No timing / shims not required
- Lightweight
- Minimal added length
- Compatible with dozens of suppressors
- Reduced Recoil
Specifications:
- 5/8-24 Barrel Threads
- Designed for Tapered Barrels
- 2.050" long (adds approx 1.5")
- 10mm Bore
- KeyMount and KeyMicro Compatible
- 17-4ph Stainless
- Black Nitride
Important Product Notes:
- On short barreled SIG Sauer firearms, gas adjustment knob modification may be required.
- This device is designed for tapered barrels ONLY such as Sig MPX, MCX, and M400.
- The ID of the Handguard will limit the use of certain suppressors
- This muzzle device is not intended to be used without a suppressor on a barrel that is shorter than the handguard
- Not compatible with SIG MCX Rattler or Copperhead K
Keymount Suppressor Compatibility
***JMac Customs is NOT responsible for improper installation of this muzzle device or any damage to the suppressor using this device. We recommend this be professionally installed and checked to ensure alignment.***
JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.
This is a licensed product through Dead Air Silencers.
No one has reviewed this product!
Write a Review
