(R)ecoil (R)eduction (D)evice (360) Degree Ports (28)1/2-28 Threads (H)eavy (D)uty (F)FaceMount (X37)1.375-24 External Threads
This FaceMount device is designed specifically for firearms that lack the shoulder to properly index a standard muzzle device against. This muzzle device is perfect for Kalashnikov pattern firearms with a gas block near the threads or a barrel with threads longer than 0.625" such as the 5.56 Galil ACE.
The RRD-360HD is designed specifically with short barrels and high pressures in mind! Due to excess pressures and gasses associated with rifle calibers in short-barreled firearms, a barrel length restriction was put in place for many of our popular devices. To remedy this, we've taken our 360 design and reinforced the device by adding additional material where it's needed and removing material in some areas to cut down on size, and weight. You get the same amazing performance out of our 360 devices, now with a Heavier Duty design for short-barreled firearms!
The X37 Series Muzzle Brakes combine our effective RRD muzzle brake design and a direct thread mount for several popular suppressors as well as our BDS-37 and BDS-37-EXT blast shield! This allows you to leave the muzzle device installed and simply thread the suppressor over! Reduces weight, length, and cost compared to QD systems. Direct thread is also the preferred mounting method for accuracy!
What makes the 360 unique?
- 3 layers of protection for your suppressor
- No timing / shims not required
- Lightweight
- Minimal added length
- Compatible with dozens of suppressors
- Reduced Recoil
Product Specs:
- 1/2-28 Threads
- 1.488” Overall Length
- X37 - 1.375-24 External Threads
- 10mm Bore
- 17-4ph Stainless Steel
- Black Nitride
- FaceMount
This device is designed to be tightened against the face of the barrel. If timing is required, you must use our face shims (optional) or your barrel MUST be faced to properly time this muzzle device. If you're not familiar with Facemount devices, click HERE to learn more!
***JMac Customs is NOT responsible for improper installation of this muzzle device or any damage to the suppressor using this device. We recommend this be professionally installed and checked to ensure alignment.***
JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.
JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.
No one has reviewed this product!
Write a Review
