JMac - MDi-co

360 24-1.5 Facemount X20 - Wolfman

(1 Review)
$129.95 $71.89
You save $58.06
Current Stock:
55
SKU:
RRD-360-24F-X20
Weight:
3.68 Ounces
FaceMount Shims, Required for Suppressor Use
Add a Blast Shield
Pin for Pin/Weld

 

(R)ecoil (R)eduction (D)evice (360) Degree Ports (24)24-1.5RH Threads (F)Facemount (X20)1.203-28 External Threads 

The RRD-360 Muzzle Device from JMAC Customs is unlike others on the market today. This device vents gasses 360 degrees away from your muzzle requiring less effort from the shooter to manage recoil. The use of additional, smaller ports, allows the gasses to disperse in a less concentrated pattern which reduces flash and concussion when compared to a standard muzzle brake. Due to the 360 design, this device does not require timing which makes installation much more simple and does not require shims or crush washer.  

The X20 Series Muzzle Brakes combine our effective 360 muzzle brake design and a direct thread mount for several popular suppressors as well as our BDS-20 Blast Shield! This allows you to leave the muzzle device installed and simply thread the suppressor over! Reduces weight, length, and cost compared to QD systems. Direct thread is also the preferred mounting method for accuracy!

What makes the 360 unique?

  • 3 layers of protection for your suppressor
  • No timing / shims not required
  • Lightweight
  • Minimal added length
  • Compatible with dozens of suppressors
  • Reduced Recoil

Product Specs:

  • 24-1.5RH Barrel Threads
  • 1.48" long (adds approx 1")
  • 10mm Diameter Bore
  • 1.203-28 External Threads
  • 17-4ph Stainless
  • Black Nitride
  • Does not require timing
  • Compatible with BDS-20 Blast Diversion Shield and DeadAir Wolfman
  • *Not intended or recommended for barrels shorter than 10.5” (see below) 

*When testing these devices, we found that high rates of fire such as full auto or “mag dumps” could cause damage to the device due to the excess heat, pressure, and gasses from unburnt powder on shorter barrels.

This device is designed to be tightened against the face of the barrel. You must use our face shims (optional) or your barrel MUST be faced to properly time this muzzle device. If you're not familiar with Facemount devices, click HERE to learn more!

 X-Series Device Compatibility 

 ***JMac Customs is NOT responsible for improper installation of this muzzle device or any damage to the suppressor using this device. We recommend this be professionally installed and checked to ensure alignment.***

JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.

Check out our Blog Post!

 

 

JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.

Reviews (1)

Manufacturing Perfection

Written by ALEX DARABAN on Mar 3rd 2022

Perhaps one of the finest products ever to come out of JMAC customs, this thing has everything an AK enthusiast could ever ask for. Let me preface this by stating that I am an NFA expert at the nation's top-selling suppressor dealer, and I know that AK's are not the most suppressor-friendly platform on the market. This product changed everything. As an owner of a Dead Air Wolfman, I knew I could suppress 7.62x39 with it, but nobody was making a product that would accommodate it. No muzzle devices, no direct-thread adapters, nothing. One day, while surfing JMAC like I have other times for parts, I found this X20 radial brake for my PSA AK103 and my PSA AK-P 7.62x39 guns, both in the AK-74 furniture style. I was ecstatic. I bought it immediately. I took it to the FFL I work for, and tested both items, and was blown away with how quiet the Wolfman in full-length was when shooting supersonic 123 grain ammo. Then I took it home, and shot it without hearing protection based on my experience on the indoor range with it. I do not recommend you try the same as an industry professional, as the result was not quite hearing safe, but it was the closest thing to it. I was not only impressed, I was dumbstruck by how quiet the shots were even out of a 9mm can. I was confident in using the JMAC product, because even though bore concentricity is an issue for AK-pattern rifles, the generous bore dimensions of 9mm for the muzzle device and suppressor meant I shouldn't have to worry about a baffle strike (just look at the internal design of the Dead Air Wolverine based on the Russian PBS-1 as evidence). Granted, PSA does a great job paying attention to details like that, and I did check alignment with a bore-rod. As a consumer in the suppressor world, I highly encourage all consumers in the suppressor market to do the same; take your AK AND suppressor to a reputable gunsmith who can do the same for you. That said, I am not only happy with my experience, JMAC has earned a lifelong customer in me. Quality machining, intuitive innovation, American-made. What more do you want? I liked the first one so much, I bought another a week later.

Related products