Wolfman
Excellent fit and finish as per usual.
(R)ecoil (R)eduction (D)evice (360) Degree Ports (14)14-1LH Threads (F)Facemount (X20)1.203-28 External Threads
The RRD-360 Muzzle Device from JMAC Customs is unlike others on the market today. This device vents gasses 360 degrees away from your muzzle requiring less effort from the shooter to manage recoil. The use of additional, smaller ports, allows the gasses to disperse in a less concentrated pattern which reduces flash and concussion when compared to a standard muzzle brake. Due to the 360 design, this device does not require timing which makes installation much more simple and does not require shims or crush washer.
The X20 Series Muzzle Brakes combine our effective 360 muzzle brake design and a direct thread mount for several popular suppressors as well as our BDS-20 Blast Shield! This allows you to leave the muzzle device installed and simply thread the suppressor over! Reduces weight, length, and cost compared to QD systems. Direct thread is also the preferred mounting method for accuracy!
What makes the 360 unique?
- 3 layers of protection for your suppressor
- No timing / shims not required
- Lightweight
- Minimal added length
- Compatible with dozens of suppressors
- Reduced Recoil
Product Specs:
- 14-1LH Barrel Threads
- 1.48" long (adds approx 1")
- 10mm Diameter Bore
- 1.203-28 External Threads
- 17-4ph Stainless
- Black Nitride
- Does not require timing
- Compatible with BDS-20 Blast Diversion Shield and DeadAir Wolfman
- *Not intended or recommended for barrels shorter than 10.5” (see below)
*When testing these devices, we found that high rates of fire such as full auto or “mag dumps” could cause damage to the device due to the excess heat, pressure, and gasses from unburnt powder on shorter barrels.
This device is designed to be tightened against the face of the barrel. You must use our face shims (optional) or your barrel MUST be faced to properly time this muzzle device. If you're not familiar with Facemount devices, click HERE to learn more!
***JMac Customs is NOT responsible for improper installation of this muzzle device or any damage to the suppressor using this device. We recommend this be professionally installed and checked to ensure alignment.***
JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.
JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.
