(R)ecoil (R)eduction (D)evice (2) ports (C)ompensator (16)9/16x24 RH (S)houlderMount (KM)KeyMount

The RRD-2C is a shortened version of our popular RRD-4C muzzle brake. The RRD-2C was created by removing the 2 smallest ports from the RRD-4C, creating a more compact package while still maintaining the ability to mitigate recoil. 

*Can be permanently attached to a 14.5" barrel to achieve 16" OAL.

Product Specs:

• 9/16x24 RH Threads (Fits Most Original Inch FAL rifles)
• KeyMo & KeyMicro Suppressor compatible
• 10mm Bore
• 2.23" Long
• 17-4ph Stainless Steel
• Black Nitride
• *Some NEW FAL rifles have 5/8-24 threads. (confirm before ordering)
• *Not intended or recommended for barrels shorter than 10.5” (see below) 

*When testing these devices, we found that high rates of fire such as full auto or “mag dumps” could cause damage to the device due to the excess heat, pressure, and gasses from unburnt powder on shorter barrels.

Keymount Suppressor Compatibility

***JMac Customs is NOT responsible for improper installation of this muzzle device or any damage to the suppressor using this device. We recommend this be professionally installed and checked to ensure alignment.***

JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.

This is a licensed product through Dead Air Silencers.